The Ikan VX9W-S 9" 3G-SDI/HDMI Field Monitor with Scopes and L-Series Battery Plate is a professional field production monitor for camcorders and DSLR cameras. The VX9W-S features an interchangeable battery plate system, and includes an L-Series type battery plate plus a variety of digital and analog inputs, including HDMI and SD/HD/3G-SDI. The 450 cd/m² maximum brightness, combined with a 900:1 contrast ratio, provide a clear image even when shooting exteriors. A sun hood is included with the monitor.
__________________________________________________________
The 1920 x 1200 native resolution monitor offers a wealth of features that professionals require for critical focusing tasks and setting proper exposure. With loop-through outputs for the HD/SD-SDI, analog component, composite, and S-Video inputs, the VX9W-S is a highly compatible component in a video system. You can select to loop through a clean image, or output with the scopes overlaid. Additionally, the monitor will cross-convert from SDI to HDMI and HDMI to SDI. A built-in tally connector allows the monitor to display tally information. The monitor's body is made from aluminum for a balance between durability and weight, and the screen is protected by Gorilla Glass; this enables the monitor to withstand the rigors of the production day. Optional battery plates for a wide variety of DV-style batteries are available (not included), and the 100mm VESA mounting pattern enables mounting of professional battery adapter plates (D-Tap power cord required).
Mounting
Four 1/4"-20 threaded mounting holes, one on the top, bottom, and each side, are incorporated into the monitor. An included desktop stand attaches to the monitor, allowing it to sit on a desk.
Cross Conversion
The VX9W-S cross converts input signals from the 3G/HD-SDI and HDMI inputs to the outputs. Both the 3G/HD-SDI and HDMI outputs are always active, so you have one signal in and two outputs. This allows you to use the VX9W-S as a distribution hub for integrating into either an HDMI or SDI system.
Waveform
The waveform displays the luminance value of your video signal on a scale from 0 to 1 volt. Any portion of your signal above 1 volt will clip when shown on an SD display.
RGB Parade
Vectorscope
Histogram
Peaking
False Color
Clip Guides
DSLR Scaling
Zoom
Tally
Display |
| |
Panel Type | IPS-Type LCD | |
Display Size | 8.9" / 22.6 cm | |
Screen Resolution | 1920 x 1200 | |
Viewing Angle | Horizontal: 170° | |
Vertical: 170° | ||
Maximum Brightness | 450 cd/m2 | |
Contrast Ratio | 900:01:00 | |
Dot Pitch | 0.09975 x 0.09975 mm | |
Response Time | 16 ms | |
Image Controls | False Color, Focus Peaking, Pixel-to-Pixel Zoom, RGB Parade, Screen Markers, Underscan, Waveform | |
I/O | ||
Video | 1 x BNC (3G-SDI) Output | |
1 x HDMI Type A Output | ||
1 x 3BNC (Component) Output | ||
1 x BNC (Composite) Output | ||
1 x BNC (3G-SDI) Input | ||
1 x 3BNC (Component) Input | ||
1 x BNC (Composite) Input | ||
1 x HDMI Type A Input | ||
Audio | None | |
Built-In Speaker | None | |
Card Slot | None | |
Format Support | ||
Video Format | SDI (4:2:2 YCC) | |
DCI 2K: 23.98/24/25/29.97/30 | ||
1080p: 23.98/24/25/29.97/30/50/59.94/60 | ||
1080PsF: 23.98/24/25/29.97/30 | ||
1080i: 50/59.94/60 | ||
720p: 23.98/24/25/29.97/30/50/59.94/60 | ||
480i | ||
576i | ||
HDMI | ||
1080p: 23.98/24/25/29.97/30/50/59.94/60 | ||
1080PsF: 23.98/24/25/29.97/30 | ||
1080i: 50/59.94/60 | ||
720p: 23.98/24/25/29.97/30/50/59.94/60 | ||
480i | ||
576i | ||
Component | ||
1080p: 23.98/24/25/29.97/30 | ||
1080PsF: 24/25/29.97/30 | ||
1080i: 50/59.94/60 | ||
720p: 23.98/24/25/29.97/30/50/59.94/60 | ||
480i | ||
576i | ||
Composite | ||
480i | ||
576i | ||
Power | ||
DC Input Power | 7 to 24 VDC | |
Battery Type | 1 x L-Series | |
Power Consumption | 8.5 W | |
Mounting | ||
Mounting | 4 x 1/4"-20 Female | |
General | ||
Dimensions (W x H x D) | 9.1 x 7 x 1.6" / 23.1 x 17.8 x 4.1 cm | |
Weight | 3.5 lb / 1.6 kg |