Convert SDI video to an NDI stream with the Pro Convert SDI Plus video signal converter from Magewell. Pro Convert SDI features one SDI input and one SDI loop-through output with eight channels of embedded audio, and it supports SDI input up to DCI 2K 2048 x 1080 video at 60 fps. The RJ45 Gigabit Ethernet port supports encoded NDI output up to DCI 2K 2048 x 1080 8-bit 4:2:2 video at 60 fps.
________________________________________
The SDI loop-through allows you to view your input on a monitor while your NDI-encoded stream can be sent to a variety of NDI-compatible encoding or streaming applications such as OBS, XSplit, vMix, Wirecast, and others via Ethernet. The mini DIN-8 tally/PTZ port provides tally input to pass-through as well as for use with the unit's status LEDs. The LEDs also indicate power, output, and input signal status.
The unit is powered by a 5V power adapter connected to its USB 2.0 Type-B port or via PoE over its RJ45 port. The Pro Convert can be managed with a web UI to configure settings and to perform firmware updates via the USB port. A 1/4"-20 mounting thread allows you to mount the unit in a rack, with a bracket, or on a stand. Included with the Pro Convert are a USB cable, a 5V power adapter, a mini DIN-8 cable, and an L-bracket for mounting.
NDI Source Name
Status LEDs
Supported Software
Supported Web Browsers
The following web browsers have been tested successfully with the Pro Convert Web UI:
Input | |
Video Input Connectors | 1 x BNC (3G-SDI / HD-SDI / SD-SDI) Female |
Input Video Format | SDI (10/12-Bit 4:4:4/4:2:2 RGB, YCC) |
| DCI 2K: 60 fps |
| 1080p: 50/59.94/60 fps |
| 1080i: 50/59.94/60 fps |
Embedded Audio Input | SDI: 16-Channel |
Output | |
Video Output Connectors | 1 x BNC (3G-SDI / HD-SDI / SD-SDI) Female (Loop Output) |
Output Video Format | SDI (10/12-Bit) |
| DCI 2K: 60 fps |
Embedded Audio Output | SDI: 16-Channel |
Standards | |
HDCP Support | None |
EDID Support | Manual Control |
Connectivity | |
Other I/O | 1 x RJ45 LAN, NDI, PoE Input/Output |
| 1 x 8-Pin Mini-DIN PTZ, RS-422 |
Hardware | |
Tally Light | Yes |
Memory Card Slots | 1 x SD (Unspecified Type) |
OS Compatibility | Windows |
| macOS |
Power | |
Power Connector | 1 x USB Type-B (5 VDC at 2.1 A) Input |
Power Consumption | Device: 5 VDC at 1.5 A (6 W) |
Environmental | |
Operating Temperature | 32 to 113°F / 0 to 45°C |
Storage Temperature | -4 to 158°F / -20 to 70°C |
Operating Humidity | 5 to 90% |
General | |
Dimensions | 4.65 x 2.64 x 0.91" / 11.8 x 6.7 x 2.3 cm |