The WISYCOM MTP60 : MULTI-BAND TRANSMITTER is a pocket transmitter specially designed for professional wireless microphone applications.
_____________________________________________________
The multi-band MTP60 currently has the widest tuning range of any wireless transmitter on the market offering a massive range of frequencies to choose from
Monitor & control with Bluetooth via Wisycom Manager software or mobile device apps to adjust parameters in real-time
Dedicated hardware for accurate real-time positioning and advanced user interface for accessibility assistive gestures
Advanced linear technology eliminates intermodulation distortion for a more robust signal, extended range, and the ability to operate multiple transmitters in close proximity to each other without needing an intermod
Integrated low-pass audio filter eliminates ultrasonic interference from devices such as follow-focus units
Simultaneous transmit and audio recording on micro-SD
FPGA-based signal processing allows easy switching between wide and narrow band operation which, together with “Linear’ mode allows intermod free frequency planning with as little as 200kHz channel spacing
An integrated haptic engine that gives tactile feedback with different vibration patterns. This can also be activated by the remote control to discreetly alert users
_____________________________________________________
Easy configuration and monitoring thanks to the Wisycom Manager software for PC and Wisycom App for iOS or Android smartphone and tablet
Easy connection to PC with USB-C, Bluetooth or IR with suitable interface
Bluetooth interface and mobile app allow full control from mobile or tablet
Bluetooth 5 Long Range (Class 1, 100mW) with the MRK16 as a bridge allows remote control of the MTP60 over hundreds of meters
Frequency ranges | from 470 to 1075 Mhz, depends on the country |
Switchable channels | 2400 managed in 40 groups ofr 60 frequencies completely user customizable |
Switching-window | Up to 362 MHz, depending on band (see Configurations) |
Frequencies | Quartz PLL frequency synthesizer circuit (5 kHz step) |
Frequency error | ±2.5 ppm, in the rated temperature range |
RF Power | Switchable typ. 10mW/L10 W/ 20 mW/ L20 mW / 50 mW /100 mW note: in some countries high power can be disabled, for local norm! |
Antenna connector | LEMO-F 1 pin |
Modulation | wideband/narrowband FM, with digital audio conditioning (FPGA) |
Nominal deviation | ±40 kHz Wideband / ±25 kHz Narrowband |
Peak deviation | ±56 kHz Wideband / ±35 kHz Narrowband |
Spurious emissions | < 2 nW |
Telemetry feature | TX transmits also a digitally modulated sub-carrier, suitable for: tone-squelch operating remote battery monitoring optional PTT (push to talk) operation |
Noise Reduction system | ENS - Wisycom Extended-Sound Optimized |
AF bandwidth | 45 Hz ÷ 17 KHz (3dB) in NarrowBand mode (NB) 45 Hz ÷ 20 KHz (3dB) in WideBand mode (WB) |
Distortion | < 0.3 % (0.15 % typ.) |
SND/D ratio (Analogue) | typ. 115 dB (A)rms with 40 kHz deviation; typ. 121 dB (A)rms with 56 kHz deviation Wideband typ. 115 dB (A)rms with 25 kHz deviation; typ. 121 dB (A)rms with 35 kHz deviation Narrowband |
Audio input connector | LEMO 3pin |
Audio input level | from -36 dBu (12mV RMS) to 26 dBu (15.5 V RMS) adjustable in 1 dB steps |
Max input level | +26 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level |
Storage media | micro SD memory card (.wav files - BWF) |
Time code | Linear time code decoding |
Bit rate | 16 bit / 24 bit / 32 bit |
Sampling rate | 48 kHz |
Managing interface | Bluetooth 5 long range, USB-C, IrDA |
LED | 2 RGB LEDs (red, green and blue) for audio, RF and battery status. 1 LED for recording, 1 LED for battery charger |
Battery lifetime indication | percentage or minute/second |
PTT function | Pin 3 of the AF connector can be setup to an external push button |
Display | High contrast OLED white display (128 x 64 pixels) |
Power supply | 2 x AA battery (Alkaline, NiMh or Lithium), MPRLBP lithium (5.55 Wh) |
Power consumption | 250mA@ 2.6V average (display off, 100mW power) |
Battery life | approx. 10 hours @ 10mW with Alkaline batteries |
Temperature range | -10 ÷ +55 °C |
Dimensions | 75,7mm x 61,4mm x 19,4mm (HxWxD) without clip |
Weight | Approx. 140 g. without batteries (183 g. with lithium batt.) |