The Pro800 Wireless HD Multifunctional Video Transmission System from Crystal Video Technology is a long-range transmitter/receiver set allowing you to send up to a 1080p60, 4:4:4, 10-bit HDMI or SDI signal to dual SDI outputs or a single HDMI output. The Pro800 offers a transmission range of up to 2625' (800m) with a latency of <1 ms over the 5.1-5.9 GHz frequency band. The transmitter also has an SDI loop out for local monitoring.
______________________________________
Signal switch buttons on the front panel let you conveniently make your signal selections while an OLED display on both units provides signal and other status information. The system also supports timecode and features AES-128/-256 data encryption. For power, two 2-pin LEMO to D-Tap cables are included for connecting to compatible batteries, a 2-pin LEMO power supply is supplied for use on the receiver end, and an optional V-mount adapter can be installed into a 1/4"-20 mounting thread on the rear of both units. There's another mounting thread on the bottom of both units, and either can be used to mount the devices. Shoe-mount to 1/4"-20 adapters are included with the set to let you mount to your camera or elsewhere.
Other Features
Transmitter | |
Connections | 1 x SDI input on BNC |
1 x HDMI input | |
1 x SDI loop out on BNC | |
Supported Resolution | 1080p: 60/50/30/25/24/23.98 |
1080PsF: 25/24/23.98 | |
1080i: 60/59.94/50 | |
720p: 60/59.94/50 | |
576p | |
576i | |
480p | |
480i | |
Color Sampling | 4:4:4 |
Bit Rate | 10-bit |
Transmission Range | 2625' / 800 m line of sight |
Latency | ≤1 ms |
Antenna Ports | 2 x RP-SMA (2 antennas included) |
Frequency | 5.1 - 5.9 GHz |
Transmission Power | 20 dBm |
Bandwidth | 40 MHz |
Audio Formats | PCM |
Timecode | SMPTE-12M |
Encryption | AES 128-/256-bit encryption |
Mount Type | 1/4"-20 mounting thread on the rear and on the bottom |
Battery Support | Optional V-mount adapter can be attached into 1/4"-20 mounting thread on the rear |
Display | OLED |
Firmware Upgradable | 1 x mini USB |
Power Supply Input | 2-pin LEMO type |
Working Voltage | 6-17 VDC |
Power Consumption | 12 W |
Operating Temperature | 14 to 122°F / -10 to 50°C |
Storage Temperature | -40 to 176°F / -40 to 80°C |
Dimensions | 4.7 x 3 x 1.2" / 12 x 8 x 3 cm |
Receiver | |
Connections | 2 x SDI output on BNC |
1 x HDMI output | |
Resolution Supported | 1080p: 60/50/30/25/24/23.98 |
1080PsF: 25/24/23.98 | |
1080i: 60/59.94/50 | |
720p: 60/59.94/50 | |
576p | |
576i | |
480p | |
480i | |
Antenna Ports | 5 x RP-SMA (5 antennas included) |
Receiving Sensitivity | -70 dBm |
Frequency | 5.1 - 5.9 GHz |
Bandwidth | 40 MHz |
Transmission Range | 2625' / 800 m line of sight |
Audio Formats | PCM |
Timecode | SMPTE-12M |
Encryption | AES 128-/256-bit encryption |
Mount Type | 1/4"-20 mounting thread on the rear and on the bottom |
Battery Support | Optional V-mount adapter can be attached into 1/4"-20 mounting thread on the rear |
Display | OLED |
Firmware Upgradable | 1 x mini USB |
Power Supply Input | 2-pin LEMO type |
Working Voltage | 6-17 VDC |
Power Consumption | 7-8 W |
Operating Temperature | 14 to 122°F / -10 to 50°C |
Storage Temperature | -40 to 176°F / -40 to 80°C |
Dimensions | 4.5 x 4.3 x 1.3" / 11.5 x 11 x 3.2 cm |