The MYMIX MADI AUDIO INTERFACE : 16FER is a MADI to myMix interface system designed to add 16 analog or digital inputs to your existing myMix setup. It includes one myMix IEX-16L-A 16-channel input expander, a Ferrofish Pulse16 MX 16-channel AD/DA converter, and their external power supplies. Connect your sources to the Ferrofish's balanced analog, ADAT optical, and MADI optical inputs, then hook up its outputs to the DB25 or optical inputs of the IEX-16L-A input expander. The input expander integrates to your audio network via a front-panel RJ45 port.
___________________________________________________
The myMix IEX-16L-A 16-Channel Input Expander comes with two DB25 connectors and allows connection of up to 16 balanced line-level signals that can be fed from devices such as mixing consoles or external microphone pre-amps. The IEX16L-A comes with two 8-channel ADAT inputs that can be activated individually. This allows usage of 16 line level sources or 8 line level sources and 8 ADAT inputs, or 16 ADAT inputs on a single IEX-16L-A expander.
Multiple IEX-16L expanders can be used in a myMix network. The IEX-16L-A can be configured using any myMix device on the network or the optional myMix CONTROL software, including input channel naming and stereo linking. The configuration is stored automatically in the IEX-16L-A. The optional myMix CONTROL software allows uploading/downloading of complete settings for the IEX-16L-A expander. The expander can be locked by connecting a myMix to the CONFIG port, or via the myMix CONTROL. The CONFIG ports provide all the data but no audio. It can also be used to connect the myMix CONTROL network interface (myMIx PLUG).
The Ferrofish Pulse16 MX is a 1 RU rackmount 16-channel AD/DA converter offering analog, MADI, and ADAT I/O, for tracking and mixing engineers in recording studios, houses of worship, broadcast trucks, and concert venues. With 24-bit / 192 kHz Cirrus Logic converters, a TCXO internal clock, and an active jitter-elimination circuit, it delivers accurate high-resolution audio. Interface a variety of equipment via the 16 balanced 1/4" TRS inputs/outputs, four ADAT optical inputs/outputs, and optical MADI I/O. The front-panel 1/4" headphone output features digitally controlled volume and an assignable mono or stereo source.
BNC jacks provide wordclock I/O for proper synchronization with other digital equipment such as master-clock generators, additional converters, and digital consoles. Remote control of the Pulse16 MX is possible through the MIDI 5-pin ports, which also support MIDI-over-MADI embedding and extracting. Display and modification of device settings, meters, and routing are achieved via the dual color TFT screens and three front-panel controls. The Pulse16 MX includes an external power supply and a MADI cable.
MyMix IEX-16L-A 16-Channel Input Expander For MyMix Systems | |
Inputs | 16 Analog line level |
ADAT: 2 x 8 channels | |
Impedance | 20 Ω, balanced (input) |
Level | + 20 dBu (maximum input) |
Sampling Rate | 44.1/48 kHz |
Gain Adjustment Range | 0, +6, +12 dB (input) |
Frequency Response | >104 dB |
THD + N | <0.022% |
Network Type | 100 Mb/s fast Ethernet |
Cabling Type | CAT5/CAT5e |
Network Connections | 2 RJ45, (1 network, 1 myMix) |
Network Switch | Unmanaged 100BASE-TX, full-duplex for 16 channel maximum |
For >16 Channel: Managed 100BASE-TX, IGMP snooping (v2) | |
Audio Channel Limit | 2 x Maximum of multicast groups handled by the switch (on network) |
Conversion | AD/DA: 24-bit, 48 kHz |
Connectors | Input: 2 x DB25, 2 x TOSLINK |
Dimensions | 19 x 1.75 x 5" (483 x 44 x 146 mm) |
Weight | 6 lb (2.7 kg) |
Ferrofish Pulse16 MX Rackmount 16-Channel A/D-D/A ADAT Converter With MADI | |
Converter Type | AD/DA Converter |
Number of Channels | 16 |
Converter Circuitry | A/D Chipset: |
2x Cirrus Logic CS5368 | |
D/A Chipset: | |
2x Cirrus Logic CS4365 | |
Display | 2x Color Touchscreen |
Gain/Trim Range | -8 to +20 dBu (in 1 dB Steps) |
Analog Audio I/O | 16x 1/4" TRS Balanced Input |
16x 1/4" TRS Balanced Output | |
1x 1/4" TRS Unbalanced Headphone Output | |
Digital Audio I/O | 4x TOSLINK Optical ADAT Input |
1x SC-Plug Optical MADI Input (via SFP Module) | |
4x TOSLINK Optical ADAT Output | |
1x SC-Plug Optical MADI Output (via SFP Module) | |
Host Connection | No |
Host Connection Protocol | No |
Sync I/O | 1x BNC Word Clock Input |
1x BNC Word Clock Output | |
Network I/O | No |
MIDI I/O | 1x DIN 5-Pin Input |
1x DIN 5-Pin Output | |
Impedance | BNC Word Clock Inputs: |
75 Ohms | |
BNC Word Clock Outputs: | |
75 Ohms | |
Sample Rates | 32 / 44.1 / 48 / 64 / 88.2 / 96 / 128 / 176.4 / 192 kHz |
Latency | A/D Conversion: |
0.16 ms at 48 kHz | |
D/A Conversion: | |
0.25 ms at 48 kHz | |
Clocking | Internal: |
Accuracy: ±1.5 ppm | |
AC/DC Power Adapter | 12 VDC at 3 A (Included) |
Rackmount Size | 1 RU |
Operating Humidity | 0 to 75% |
Operating Temperature | 41 to 113°F / 5 to 45°C |
Dimensions | 19 x 7.5 x 1.8" / 48.3 x 19 x 4.4 cm |
Weight | 4.4 lb / 2.0 kg |