The Solidyne 2600XD digital mixing consoles are a new concept in Air Studios for radio and TV. They are installed in conventional analogue or digital studios, taking advantage of existing tables and cabling, to later evolve towards Audio over IP (AoIP) systems based on control surfaces.
In this way, your current investment in equipment already installed is fully exploited without modifying existing studies.
But later, by simply adding modules, the investment can be scaled towards an AoIP digital studio. Only Solidyne offers you this technology so that your investments grow as your station requires them.
Audio Inputs:
| A & B – 2 inputs per channel. 2601 balanced stereo line and unbalanced AUX. 2610/2612 balanced MIC 2620 Digital USB and balanced AUX. In option USB 2602, 2 inputs and 2 outputs |
Outputs:
| 3 bus outputs; PGM & AUD balanced + 4 dBm; AUX Unbalanced + 4 dBm Balanced Outs; Max Level +26dBu (10K), +20dBm (600ohms) Unbalanced Outs; Max Level = +20dBm/600 ohms Optional Digital AES/EBU output for PGM & AUD. |
Inputs Level/Impedance:
| Balanced MIC= -25 dBu/-80 dBu; 150/250 Ohms Balanced LINE = -20 dBu/+22 dBu; 600~ 10Kohms Unbalanced AUX = -20 dBu/+15dBu; 600~ 10Kohms |
Digital Levels:
| AES-3/SPDIF outputs TCP/IP & USB inputs & outputs; 0VU RMS is set at -15dB Ref Full Scale level. 0dB Peak is set to 100% Full Digital Scale |
Phantom 48v:
| Standard phantom 48V power supply for up to 10 microphones. |
Monitor & Hybrid Outputs:
| 4 stereo monitor outputs for active speakers and headphones, including internal headphones distribution Amp (up to 8 headphones) in announcer studio. 1 External Hybrid input + 4 dBu/10K 1 External Hybrid send output (MIX-Minus) +4 dBu / 10K Each 2602 channel has one Mix-Minus out at 0 dBu output
|
CUE Monitor: | 3W CUE monitor with internal speaker. |
ON-AIR LIGHT:
| ON-AIR signal output (turns on when MIC is open) 12 VDC @ 0,3 amp |
Start external devices:
| One Start Devices output for each input module, to start external devices when open each channel fader. Out at minijack 1/8" // Ring = A channel (left side) Tip= B channel (right side) Open collector OFF = Open. Manages 0-24 VDC @ 100 mA. Headroom: 22 dB @ LIN a PGM Ref + 4dBu/10 k Frequencies response: 20-20.000 Hz +/- 0.25 dB (LIN or MIC to PGM) Noise: MIC, EIN=-132 dBu/200 ohms LINE, S/N > 95 dBA Dynamic range: From LINE to PGM > 110dBA (better than "CD quality") Crosstalk: PGM-AUD-SEND > 90 dBA @30-10.000 Hz L-R & R-L > 80 dBA @ 1khz |
Distortion: | From LINE to PGM out < 0.01 % THD @30-15.000 Hz. From MIC to PGM out < 0.01 % THD @30-15.000 Hz |
Phase: | From Line to PGM, < 2º L&R @50-10.000 Hz |
Stereo tracking: | Below 0.2 dB error L/R in fader range 0 to 40 dB |
Talkback microphone:
| Included Talkback MIC, with Audio Limiter. Noise Cancelled PZM type / Outputs to Phone Line Hybrid and Studio Speaker with AutoSwitch (AutoSwitch allows one-touch Studio communication) |
VU-meters: | 2600XL: 4 digitally controlled VU meters 24 steps of 1 dB, DUAL type (RMS & Peak) for PGM & AUD. One Timer/Clock and one Stereo Phase Vector display |
Timer /Clock Option:
| Timer counts minutes: seconds during on-air MIC in order to avoid excessive speaker on-air time When the Timer is off, a standard clock is activated |
Power source:
| 40W switch 90-240V, 50/60 Hz, CE, UL, TUV Certified |
Dimensions & Weight:
| XL model: 840mm (w) x 585mm (d) x 135mm (h) - Weight 15 kg 2600XD: 845mm (w), 635mm (d), 125 mm (h)- Weight 15 kg |