The AN-16/o v.4 Output Module connects to any Pro16 input module, console card, or A-Net distributor and provides 16 balanced TRS line-level analog outputs. Five output levels, from mic to +24dBu, are available to easily accommodate the level requirements of the gear its output signals are being connected to.
Use the AN-16/o v.4 anywhere analog outputs are required: on stage or at FOH in a digital snake, in the studio, for a recording split, or in even the most complex audio networks. Adding a digital split to a Pro16 system is as simple as connecting an additional AN-16/o v.4 Output Module.
Compatibility Note: AN-16/o v.4 Output Modules with serial numbers 51162 and lower are compatible with only Pro16 A-Net and not Pro16e A-Net. The Pro16e version of A-Net is used by the AN-16/i v.2 as well as the D800 and D400 series of A-Net Distributors.
Product Details
Connecting to Wireless In-Ear Monitors
Digital Snakes and Audio Networks
Audio Outputs | 16 channels, balanced |
---|---|
Outputs | DB25 multipin connectors (2); Tascam® analog audio pinout Impedance balanced output for mic, +4dBu, and +18dBu; differential output for +24dBu |
D/A Conversion | 48kHz sample rate, 24 bit |
Frequency Response | 4Hz-22kHz |
A-Net Input/Output | one EtherCon Category 5 (RJ45 connector) |
A-Net Expansion | one EtherCon Category 5 (RJ45 connector) |
Output Level Settings | Four-position switch, per channel pair; +24dBu, +18dBu, +4dBu, and Mic |
Channel LED Indicators | Signal Present and Clip, per channel |
Metering | LEDs; green: Signal Present; red: Clip; per channel |
Maximum Output Level | +24dBu |
Output Impedance | 226 ohms (+18dBu, +24dBu); 100 ohms (+4dBu and mic) |
Freq. Response | 4Hz-22kHz +0.2dB/-3dB |
THD +N | < 0.004% |
Crosstalk | -90dB |
Bit Error Rate (BER) | 10(-12) |
Signal to Noise (unweighted) | 92dB typical, A/D to D/A Measured from AN-16/i to AN-16/o v.4 Output Module |
Digital Connections | A-Net In: 1; A-Net Out: 1; A-Net Expansion: 1; Neutrik EtherCon connectors |
A-Net Pro16 | A-Net Expansion combines two A-Net streams (32 channels of audio) onto one Cat-5e cable; uses unshielded Cat-5e UTP (or better) cable |
Latency | <0.620 msec (measured from analog input to analog output) |
Power Supply Input Voltage Output Voltage Plug Size | External, DC, universal switching type 100-240 volts, 50/60Hz, 30VA 24 VDC, 0.5 amp 2 mm |
Power | 24 VDC, 500mA |
Dimensions | 19" (482.6 mm) wide x 5.75" (146 mm) deep; 1U high |
Weight | 6.8 lbs. (3.08 kg) |
Options | SB4 System Bridge; used to combine up to four A-Net streams for transmission over one Cat-5e cable |