021 201 7250 | sales@progearsa.co.za

HomeAudioDante specificInterfacesMYMIX MADI AUDIO INTERFACE : 16FER

12 of 13

Description
Specifications
In the box
Price Match

The MYMIX MADI AUDIO INTERFACE : 16FER is a MADI to myMix interface system designed to add 16 analog or digital inputs to your existing myMix setup. It includes one myMix IEX-16L-A 16-channel input expander, a Ferrofish Pulse16 MX 16-channel AD/DA converter, and their external power supplies. Connect your sources to the Ferrofish's balanced analog, ADAT optical, and MADI optical inputs, then hook up its outputs to the DB25 or optical inputs of the IEX-16L-A input expander. The input expander integrates to your audio network via a front-panel RJ45 port.

Key Features

Adds 16 Inputs to a myMix Setup
Ferrofish 16-Channel AD/DA Converter
1 x myMix 16-Channel Input Expander
16 Balanced Analog Inputs & Outputs
32-Channel ADAT Optical I/O
64-Channel MADI Optical I/O
Front-Panel 1/4" Headphone Output
RJ45 Port for Connection to Network
Color TFT Screens
Includes External Power Supplies

___________________________________________________

myMix IEX-16L-A 16-Channel Input Expander for myMix Systems

The myMix IEX-16L-A 16-Channel Input Expander comes with two DB25 connectors and allows connection of up to 16 balanced line-level signals that can be fed from devices such as mixing consoles or external microphone pre-amps. The IEX16L-A comes with two 8-channel ADAT inputs that can be activated individually. This allows usage of 16 line level sources or 8 line level sources and 8 ADAT inputs, or 16 ADAT inputs on a single IEX-16L-A expander.

Multiple IEX-16L expanders can be used in a myMix network. The IEX-16L-A can be configured using any myMix device on the network or the optional myMix CONTROL software, including input channel naming and stereo linking. The configuration is stored automatically in the IEX-16L-A. The optional myMix CONTROL software allows uploading/downloading of complete settings for the IEX-16L-A expander. The expander can be locked by connecting a myMix to the CONFIG port, or via the myMix CONTROL. The CONFIG ports provide all the data but no audio. It can also be used to connect the myMix CONTROL network interface (myMIx PLUG).

Ferrofish Pulse16 MX Rackmount 16-Channel A/D-D/A ADAT Converter with MADI

The Ferrofish Pulse16 MX is a 1 RU rackmount 16-channel AD/DA converter offering analog, MADI, and ADAT I/O, for tracking and mixing engineers in recording studios, houses of worship, broadcast trucks, and concert venues. With 24-bit / 192 kHz Cirrus Logic converters, a TCXO internal clock, and an active jitter-elimination circuit, it delivers accurate high-resolution audio. Interface a variety of equipment via the 16 balanced 1/4" TRS inputs/outputs, four ADAT optical inputs/outputs, and optical MADI I/O. The front-panel 1/4" headphone output features digitally controlled volume and an assignable mono or stereo source.

BNC jacks provide wordclock I/O for proper synchronization with other digital equipment such as master-clock generators, additional converters, and digital consoles. Remote control of the Pulse16 MX is possible through the MIDI 5-pin ports, which also support MIDI-over-MADI embedding and extracting. Display and modification of device settings, meters, and routing are achieved via the dual color TFT screens and three front-panel controls. The Pulse16 MX includes an external power supply and a MADI cable.

MyMix IEX-16L-A 16-Channel Input Expander For MyMix Systems
Inputs	16 Analog line level
	ADAT: 2 x 8 channels
Impedance	20 Ω, balanced (input)
Level	+ 20 dBu (maximum input)
Sampling Rate	44.1/48 kHz
Gain Adjustment Range	0, +6, +12 dB (input)
Frequency Response	>104 dB
THD + N	<0.022%
Network Type	100 Mb/s fast Ethernet
Cabling Type	CAT5/CAT5e
Network Connections	2 RJ45, (1 network, 1 myMix)
Network Switch	Unmanaged 100BASE-TX, full-duplex for 16 channel maximum
	For >16 Channel: Managed 100BASE-TX, IGMP snooping (v2)
Audio Channel Limit	2 x Maximum of multicast groups handled by the switch (on network)
Conversion	AD/DA: 24-bit, 48 kHz
Connectors	Input: 2 x DB25, 2 x TOSLINK
Dimensions	19 x 1.75 x 5" (483 x 44 x 146 mm)
Weight	6 lb (2.7 kg)
Ferrofish Pulse16 MX Rackmount 16-Channel A/D-D/A ADAT Converter With MADI
Converter Type	AD/DA Converter
Number of Channels	16
Converter Circuitry	A/D Chipset:
	2x Cirrus Logic CS5368
	D/A Chipset:
	2x Cirrus Logic CS4365
Display	2x Color Touchscreen
Gain/Trim Range	-8 to +20 dBu (in 1 dB Steps)
Analog Audio I/O	16x 1/4" TRS Balanced Input
	16x 1/4" TRS Balanced Output
	1x 1/4" TRS Unbalanced Headphone Output
Digital Audio I/O	4x TOSLINK Optical ADAT Input
	1x SC-Plug Optical MADI Input (via SFP Module)
	4x TOSLINK Optical ADAT Output
	1x SC-Plug Optical MADI Output (via SFP Module)
Host Connection	No
Host Connection Protocol	No
Sync I/O	1x BNC Word Clock Input
	1x BNC Word Clock Output
Network I/O	No
MIDI I/O	1x DIN 5-Pin Input
	1x DIN 5-Pin Output
Impedance	BNC Word Clock Inputs:
	75 Ohms
	BNC Word Clock Outputs:
	75 Ohms
Sample Rates	32 / 44.1 / 48 / 64 / 88.2 / 96 / 128 / 176.4 / 192 kHz
Latency	A/D Conversion:
	0.16 ms at 48 kHz
	D/A Conversion:
	0.25 ms at 48 kHz
Clocking	Internal:
	Accuracy: ±1.5 ppm
AC/DC Power Adapter	12 VDC at 3 A (Included)
Rackmount Size	1 RU
Operating Humidity	0 to 75%
Operating Temperature	41 to 113°F / 5 to 45°C
Dimensions	19 x 7.5 x 1.8" / 48.3 x 19 x 4.4 cm
Weight	4.4 lb / 2.0 kg