The FERROFISH A32PRO : DANTE CONVERTER MULTIMODE is based on a new modular hardware platform and packed with analog and digital interfaces. In addition to the 32x32 balanced studio-quality analog inputs and outputs and the stereo main out up to 192 kHz, the A32pro offers ADAT and MADI connections—probably the most widely used digital audio interfaces available—along with Dante digital audio networking. Two RJ-45 ports provide a 64x64 Dante digital audio network connection with redundancy. In addition to the optical first MADI module, another SFP MADI module can be added. Different modes allow redundant operation of both interfaces: If one fails, the other one is activated automatically. Speaking of redundancy: If desired, two power supplies can be connected to the device. All power supplies and interfaces are permanently monitored: In the event of a failure, an error message is output on the TFT screens and on the General Purpose Output (GPO) to connect it to additional hardware. Packed into a compact 1 RU space, the highly integrated converter is equipped with 32x32 balanced analog channels, brought out on four D-SUB connectors. They deliver studio levels up to +20 dBu, individually adjustable in 1 dB steps. The sophisticated design, using the latest generation of ESS converters, accompanied with a temperature-compensated clock and jitter reduction PLL, guarantees crystal-clear sound up to 192 kHz. The A32pro is not just a converter but thanks to its flexibility, using a sophisticated routing matrix, it is also a digital format converter for integrating your existing and future Dante, MADI, and ADAT equipment.

Key Features

• 32 Analog Inputs, 32 Analog Outputs
• Up to 192 kHz
• 4 D-Sub Connectors
• Dante Digital Audio Networking
• ADAT and MADI Digital Support
• Flexible Internal Routing Matrix
• 4 High-Resolution TFT Displays
• Redundant Power Supply
• Remote Control via USB and MIDI

Dante Plug and Play

Integrating the A32pro Dante seamlessly into your Dante network has never been easier. Just plug it in and the device is visible on the network and ready to be routed freely using the Dante Controller software. Together with the Dante PCIe Card or DVS (Dante Virtual Soundcard), the A32pro Dante turns into a universal audio interface. Two RJ-45 ports are provided. Simply connect a LAN Ethernet cable (CAT5/CAT6) to the primary port. The secondary port takes over automatically in case of a network error (Dante port redundancy).

4 x Multitouch TFT User Interface

Four high-resolution pin-sharp TFT displays provide detailed level information for all 32 analog input and output signals, allowing the overview of the signal flow in and out of the unit. Also the status of all digital interfaces, including the clocking and GPIO status and the loaded preset is visible all the time.

Redundant MADI I/O System

The MADI I/O system of the A32pro Dante is provided as dual SFP ports for MADI modules. So a variety of different configurations (single or double (redundant) in single- or multimode or coaxial) is possible. The I/O support MADI delay compensation, 64- and 56-channel formats and port redundancy. MADI streams can be used to send and receive embedded MIDI messages.

Internal Routing Matrix

The A32pro Dante provides a sophisticated internal matrix for the free routing and splitting of all 192 inputs to all 192 outputs in blocks of 8 channels. The headphone output allows it to monitor every mono or stereo (or even in M/S, mid/side) I/O channel from the front of the unit.

Redundant Power Supply

For reliability, the A32pro can be powered by two power supplies. Both power supplies are permanently monitored, and switched without interruption in case of failure.  A warning message is shown on the screen and/or sent by MIDI to be able to react on this failure.

Flexible Remote Control

A comprehensive remote software, called RemoteFish, for PC and Mac is available to control the A32pro series. In addition to USB, the A32pro Dante can also be connected via MIDI (by simple MIDI commands) or MIDI-over-MADI. All Ferrofish devices are automatically detected and listed in the software.

Dual Slots for DSP Sticks

The modular platform is ready for expansion: Two slots for optional DSP sticks open a whole new world for multichannel audio processing. From a single module configuration to redundant dual SFP Modes (Single/Multimode or Coaxial), everything is possible.

4x4 ADAT TOSLINK

Each ADAT port transfers eight channels at a sample rate of 48 kHz (32 inputs + 32 outputs). A SMUX/2 mode up to 96 kHz is also possible.