AUDIOROOT BATTERY POWER CABLES

R895.00
(R1 029.25 incl VAT)
Short description:

Battery output cable - HRS4 version

07-DIS-CAB-054

EHRS4-OUT : Hirose 4pin - Straight

  • 24″ / 60cm straight cable with molded battery connector.
  • Hirose 4pin male end connector

 

EHRS4RA-OUT : Hirose 4 pin - Right Angle

  • 24″ straight cable with molded battery connector.
  • Hirose right angle 4 pin male end connector

 

ECOIL-OUT : Battery output coiled cable - no connector

3′ 2-conductor coiled cable (extends to 5′) with molded battery connector. Delivered without connector.

 

EZAXRX-OUT : Power for Zaxcom RF Receivers

Battery output cable with locking right angle connector. Plugs directly into AUDIOROOT smart batteries (eSMART Li-49Wh and 98Wh).  Switchcraft 761K compatible molded connector. Special lengths on request.

  • Cable length : 20cm (8′)
  • DC barrel connector inner diameter : 2.5mm
  • DC barrel connector outer diameter : 5.5mm
  • Cable diameter : 4.4mm
  • Conductor gauge : 20AWG
  • Receiver compatibility : RX900, QRX100, QRX200 and QRX235

 

ESRARX-OUT : Power cable for Lectrosonics SRa and SRb receivers

Battery output cable with locking right angle connector. Plugs directly into AUDIOROOT smart batteries (eSMART Li-49Wh and 98Wh).  Switchcraft S760K compatible molded connector. Special lengths on request.

  • Cable length : 20cm (8′)
  • DC barrel connector inner diameter : 2.1mm
  • DC barrel connector outer diameter : 5.5mm
  • Cable diameter : 4.4mm
  • Conductor gauge : 20AWG
  • Receiver compatibility : Lectrosonics SRa and SRb RF receivers

 

EXLR4-OUT : XLR 4pin female

  • 24″ / 60cm straight cable with battery connector.
  • Neutrik XLR4F end connector

 

ECON-OUT : Battery output cable - no connector

60cm straight cable with molded battery connector. End connector not included. Available in 2 versions :

  • eCON-OUT : 2 conductor cable (power only)
  • eCON-OUT-4W : 4 conductor cable (power + smBUS data/clk lines)

 

EHRS4-HSW-4W : Hotswop battery cable for eSMART BG-DU

This cable can be used to connect 2 x AUDIOROOT eSMART batteries on a BG-DU or BG-DU-REG for simultaneous use or hotswapping.

Important notes :

  • As this cable is passive the BG-DU will display battery telemetry from only 1 battery when 2 batteries are connected.  The battery from which battery info is read is selected randomly (first battery to respond to smbus master commands).
  • It is always the battery with highest voltage which handles the load. As the batteries’ voltage balance themselves during use they will tend to share the load 50/50.
    At that point current and power information shown on the BG-DU will correspond to half the actual values and estimated runtime will be correct.

Overall length : 60cm – custom lengths on request

 

 

Found a lower price? Complete this simple form:



Please feel free to contact us if you have any questions or need more information about this product using the form below.


No posts found

Write a review

Items of interest

Customers also bought