ZAXCOM QRX200 : WIDE-BAND 4 CHANNEL RECEIVER

R37 121.88
(R42 690.16 incl VAT)
Short description:

Wide-Band 4-channel ENG receiver

01-WIR-REC-003
  • Receives mono or stereo audio from up to TWO transmitters
  • Receives ZHD transmission from up to TWO transmitters, spacing @ 200 KHz (300 KHz recommended spacing)
  • Includes two straight SMA antennas
  • Runs on an external 12 volt source
  • DIGITAL MODULATION 100% digital modulation for superior audio quality
  • ENCRYPTED AUDIO keeps transmitted audio private

The QRX200 is a 200 MHz wide ENG receiver. A tunable tracking front end filter is featured in the QRX200 so you can receive any frequency in any block from 20 through 27 or 512 – 698 MHz while still filtering out unwanted RF.

There are three components that give the QRX200 its enhanced distance / range

  • New digital modulation
  • Enhanced receiver design giving it maximum sensitivity while lowering its noise floor
  • The elimination in any difference between single and dual mode

Side mounted LED’s provide visual confirmation of audio and RF reception. A group of 12 multi-colored LEDs are recessed into the side of the QRX200 (Patented). They are visible with the QRX200 mounted in its Zaxcom camera mount and provide the sound mixer with visual confirmation of audio reception at the camera. The LEDs are very bright and can be seen from quite a distance even in bright sunlight.

Receives up to 4 channels of 100% digital audio from 2 transmitters

The QRX200 outputs audio as an analog signal or as an AES digital signal.

Any combination of Zaxcom mono or stereo transmitters can be used with the QRX200.

AND THEY SAY IT'S NOT ABOUT THE SIZE OF YOUR BANDWIDTH

RANGE IS EVERYTHING : Zaxcom's all new digital modulation and components gives the QRX200 significantly enhanced distance and range.

NEVER RE-BLOCK AGAIN : QRX200 has an automatic tracking front end filter so you can receive on any frequency in any block from 20 through 26 (512-698MHz)

DOUBLE THE FUN : A single light weight QRX200 can receive audio from two separate transmitters leaving more room in your sound bag for a snack.

 

Receiver

 
Single Mode Receiver Type True diversity single conversion digital demodulator
Dual Mode Receiver Type Antenna diversity single conversion digital demodulator
RF Modulation Proprietary digital method
RF Frequency Range 512 to 698 MHz
RF Frequency Step 100 KHz
RF Bandwidth 200 KHz
Channel Separation 500 KHz (700 KHz recommended)
Sensitivity 110 dBm
Antenna Connector 50­ohm SMA female
Dynamic Range 114 dB
Distortion 0.001%
DAC Rate 48 kHz
Connector TA­5M
Audio Output Level Line: ­10 to 0 dBm active balanced
Signal Format AES Balanced
Audio Output Connector TA­5M
Weight 6.0 oz (170 grams)
Dimensions 1.25″ x 3.25″ x 5.25″ (32mm x 83mm x 133mm)
External Power 9 to 18 VDC (300mA @ 12VDC)
Internal Power N/A
Display Graphic LCD Panel
  • 1 x QRX200 unit
  • 2 x straight SMA antennas

Manual (Zaxcom_QRX200_Manual_August_2016.pdf, 1,473 Kb) [Download]

Firmware (QR2-413.zip, 410 Kb) [Download]

No posts found

Write a review
Found a lower price? Complete this simple form:



Please feel free to contact us if you have any questions or need more information about this product using the form below.


Items of interest

Customers also bought