SOUND DEVICES SCORPIO : 32 CH / 36 TRK RECORDER

Price upon request
Short description:

The Scorpio is a 32-channel, 36-track, Dante-enabled portable field mixer and recorder

01-REC-LOC-038

Designed for production use in the field—and boasting a powerful feature set even by the standard of Sound Devices—the Scorpio is a 32-channel, 36-track, Dante-enabled portable field mixer and recorder with a panoply of connections. Indeed, the Scorpio is the flagship sound-recording device in Sound Devices' production line.

 

Key Features

  • 16 Low-Noise, High-Quality Mic/Line Ins

  • 32 I/O over Dante, AES I/O
  • Per-Channel EQ, HPF, Limiting & More
  • 48V Phantom Power
  • XLR, TA5 & TA3 Inputs / 12 Analog Outs
  • 12 Busses, Fully Routable Matrix
  • Accurate Timecode Generator
  • Internal 256 GB SSD
  • Simultaneous Recording to SD Cards
  • Multiple Battery & Powering Options

 

__________________________________________

 

16 high-quality, low-noise preamps are on-hand right from the device, accepting inputs over XLR, TA3, and TA5 connections. These preamps outperform all previous Sound Devices pres by any measurable spec. All of them provide 3-band EQs, analog limiting, high-pass filters, adjustable delays, and phantom power.

Need 32 channels of Dante in and out? The Scorpio is equipped for that. It also handles AES I/O and gives you 12 analog outputs. Multiple headphone outs are on hand to suit any kind of situation. Even communication headsets can be accommodated.

Use the Scorpio to mix up to 12 individual buses, all in a compact form factor that works equally well in an over-the-shoulder rig or a mobile environment. With an onboard engine that makes use of three FGPA circuits and six ARM processors, the Scorpio can handle complex routing schemes, pushing audio through its 64-bit engine to ensure a high-quality sound for your demanding, in-the-field needs.

The Scorpio boasts a 256 GB internal SSD for recording audio straight to the device, though two SD card slots are on hand for redundancy. Simultaneous recording is supported—though that of course might be redundant to say. The accurate, onboard timecode generator boasts its own battery to hold timecode for up to four hours after you power off the device.

The device was built to be as ergonomic as it is powerful, offering you one- or two-button accessibility to most menu options, and one-handed control over many menu shortcuts. Power the mixer with L-mount batteries, or use the TA4 DC inputs with smart batteries, inline power supplies, or NP-1 batteries. This Sound Devices' sound device even gives you a built-in dual L-mount battery charger.

 

Frequency Response

10 Hz to 80 kHz ±0.5 dB (192 kHz Sample Rate, Reference at 1 kHz)

THD + Noise

0.005% Max (Mic Input, 1 kHz, 22 Hz to 22 kHz BW, Trim at 20, Fader at 0, -10 dBu Input)

Equivalent Input Noise

-131 dBV (-129 dBu) Max (Mic Input, A-Weighting, 76 dB Gain, 150-Ohm Source)

Engine

FPGA-Based Audio Processing, 3 FPGAs

 

6-Way ARM Multiprocessor System

 

64-Bit Audio Processing Precision

Ethernet Specifications

Dante, AES67 Compatible

 

32 Channels I/O (up to 96 kHz), 16 Channels I/O (192 kHz)

 

1 GB/s

 

2 Ports, Transformer-Balanced

Mic Inputs

Class-A, Discrete Differential, Long-Tail Pair

Line Inputs

Active-Balanced

Inputs

Mic/Line Inputs: 6 x XLR-3, 2 x TA3, 8 x TA5

 

Mic-Level Inputs: (XLR, TA3, TA5): Class-A, Discrete Differential Long-Tail Pair 

 

Line-Level Inputs: (XLR, TA3, TA5): Active-Balanced 

 

48 V Phantom: 10 mA to All 16 Inputs Simultaneously

 

AES3 or AES42: over XLR Inputs 1 and 6

 

AES42: +10 V, 250 mA Available, Mode-1, Auto-ASRC

 

Rtn A, B, C (3.5 mm/10-Pin): Unbalanced 2-Channel 

 

Com Rtn 1, 2 (TA3/3.5mm): Balanced, 1-Channel 

 

External Slate Mic (TA5): Balanced,  Menu-Selectable 12 V Phantom 

Input Impedance

Mic-Level Inputs: 4 kOhms

 

Line-Level Inputs: 4 kOhms

 

Rtn A, B, C (3.5 mm/10-Pin): 4 kOhms 

 

Com Rtn 1, 2 (TA3/3.5mm):  8 kOhms

 

External Slate Mic (TA5): 8 kOhms 

Maximum Input Level

Mic: +8 dBu (2.0 Vrms)

 

Line: +28 dBu (19.5 Vrms)

 

Rtn A, B, C: +18 dBu (6.2 Vrms)

 

Com Rtn 1, 2: +24 dBu (12.3 Vrms)

 

External Slate Mic: +12 dBu (3.2 Vrms)

High-Pass Filter

Adjustable from 40 to 320 Hz, 18 dB/Oct

 

1st Stage: Analog (Before Preamp)

 

2nd Stage: Digital

Limiter

1st Stage: Analog

 

All Subsequent Stages: Digital

 

Attack Time: 1 ms

 

Release Time: Adjustable, 50 to 1000 ms

 

Threshold: Adjustable, -2 to -12 dBFS

 

Selectable Knee: Hard or Soft

 

Selectable Ratio: Inf: 1, 20:1

Delay

Channel Adjustable: 0 to 50 ms

 

Output Adjustable: 0 to 500 ms

Maximum Gain

Trim Stage (Mic Input): 76 dB

 

Trim Stage (Line Input): 36 dB

 

Fader Stage: 16 dB

 

Bus Stage: 16 dB

 

Headphone Stage: 20 dB

 

Mic-to-Line: 108 dB

 

Mic-to-Headphone: 112 dB

Outputs

XLR (L, R): Active-Balanced

 

Hirose 10-Pin (L, R): Active-Balanced

 

TA3 (X1-X6): Active-Balanced

 

3.5 mm Output (X7, X8): Unbalanced, Stereo

Output Impedance

XLR (L, R): 250/120 Ohms / 3.2 kOhms (Mic/Line/-10)

 

Hirose 10-Pin (L, R): 250/120 Ohms / 3.2 kOhms (Mic/Line/-10)

 

TA3 (X1-X6): 250/120 Ohms / 3.2 kOhms (Mic/Line/-10)

 

3.5 mm Output (X7, X8): 1.8 kOhms

Headphone Outputs

1/4" and 3.5 mm Outputs

 

TA5 (along with Mic-Input Pins) for Single Connection to Headset + Mic

 

High Output, 4-Ohm Output Impedance

 

400 mW + 400 mW at Each Connector, Individually Driven

 

Compatible with Headphones of Any Impedance

Maximum Output Level

Line: +20 dBu (7.8 Vrms)

 

-10: +6 dBu (1.5 Vrms)

 

Mic: -20 dBu (0.078 Vrms)

 

X7/X8 Out: +6 dBu (1.5 Vrms)

 

Headphone Outputs (1/4", TA-5, X9/X10): +14 dBu (4.0 Vrms)

A/D Converters

32-Bit, 120 dBA, typical

 

Sampling Rates: 44.1 / 47.952 / 48 / 48.048 / 88.2 / 96 / 192 kHz

Digital Outputs

AES3 Transformer-Balanced, in Pairs; 1-2 (XLR-L), 3-4 (XLR-R), 5-8 (Hirose 10-Pin A)

 

110 Ohms, 2 V p-p, AES and S/PDIF Compatible

Storage Space

256 GB SSD, Internal

SD Card Slot

2 x, exFAT Formatting

Recording Format

Broadcast WAV Monophonic and Polyphonic File Format

 

64-Bit WAV (RF64) Monophonic and Polyphonic Support for Files >4 G

USB

USB-C (USB 3.1 Type 1) for File Transfer of Internal SSD, both SD Cards

 

USB-A Host for Keyboard, External Controller

 

External USB Hubs Supported for Connecting Multiple Devices

Timecode

Modes Supported: Off, Rec Run, Free Run, 24H Run, External (Including External Auto-Record and Continuous Modes)

 

Accuracy: 0.1 ppm (0.25 Frames per 24 Hours)

Frame Rates

23.98, 24, 25, 29.97 DF, 29.97 ND, 30 DF, 30 ND

Timecode Input

20-kOhm Impedance, 0.3 V to 3.0 V p-p (-17 dBu to +3 dBu)

Timecode Output

75-Ohm Impedance, 5 V p-p (+12 dBu)

Word Clock I/O

Input: 10-kOhm/75-Ohm Selectable Impedance, 1-5 V p-p Input Sensitivity

 

Output: 75-Ohm Impedance, 5 V p-p Output, at SR

Remote Control

USB MIDI MCU Control

 

SD-Remote Android App

 

USB Keyboard

 

External Timecode Record Trigger

LCD

320x240

Power

External: Dual 10 to 18 VDC Inputs on Locking TA4 Connectors, Pin-4 = (+), Pin-1 = (-)

 

Dual Rearmount Sony-Style L-Mount Batteries with Chargers

Current Draw

875 mA at 12 V (10.5 W), Idle

Operating Temperature

-4 to 140°F / -20 to 60°C

Storage Temperature

-40 to 185°F / -40 to 85°C

Relative Humidity (non-condensing)

0,9

Dimensions (H x W x D)

2 x 12.6 x 8.1" / 5.1 x 32 x 20.5 cm

Weight

5.8 lb / 2.6 kg

 

  • Sound Devices Scorpio 32-Channel/36-Track Portable Mixer-Recorder for Pro Audio Applications
  • Sound Devices XL-WPTA4 AC to DC Power Supply for Scorpio Mixer-Recorder
  • SMA Antenna
  • Limited 1-Year Warranty
Found a lower price? Complete this simple form:



Please feel free to contact us if you have any questions or need more information about this product using the form below.


No posts found

Write a review

Items of interest

Customers also bought