SENNHEISER MKH 50-P48 : SUPER CARDIOD

R24 427.83
(R28 092.00 incl VAT)
Short description:

Pressure gradient microphone with super-cardioid pick-up pattern

01-MIC-GEN-001

Super-cardioid microphone designed for use as a soloist's or spot microphone for applications requiring a high degree of side-borne sound muting and feedback rejection. Frequency-independent directional characteristics.

The MKH 50 P48 Microphone from Sennheiser is a high quality, professional condenser microphone specifically designed for spot capturing in recording and sound reinforcement applications. The MKH 50 offers exceptional attenuation at the lateral sections of the capsule, for a focused pick up without off-axis noise. Its wide frequency response and high sensitivity result in pristine audio fidelity, no matter the source. It also has a low-frequency roll-off switch to minimize rumble/noise, and a pre-attenuation switch in case you'll mount the microphone near to high transients. The MKH 50 use +48V Phantom Power, and is more than suitable for capturing vocals or instruments in recording or sound reinforcement.

  • A pressure gradient condenser mic specifically created for spot recording
  • Supercardioid polar pattern to provide focused capture and extreme off-axis rejection
  • Low frequency roll-off switch to minimize rumble and noise
  • Switchable pre-attenuation provides an additional 10dB of headroom to prevent distortion from close-proximity transient signals
  • Uses +48V Phantom Power

Features

  • Pressure gradient microphone with super-cardioid pick-up pattern
  • High rejection of lateral sounds
  • Constant directivity over the whole frequency range
  • Exceptionally low inherent self-noise
  • High sensitivity
  • Switchable roll-off filter to compensate for proximity effects at a distance of approx. 0.5m
  • Switchable pre-attenuation

Analog Performance

Operating Principle Pressure Gradient
Polar Pattern Supercardioid
Frequency Range 40 Hz to 20 kHz
Equivalent Noise Level 12 dB A-Weighted
21 dB CCIR
Maximum SPL 134 dB SPL
142 dB SPL
Pad 10 dB
Impedance 150 Ohms
Load Impedance 1000 Ohms
Low-Cut Filter 12 dB/Octave @ 30 Hz

General

Output Connectors 1 x 3-Pin XLR
Operating Current Consumption 2 mA
Operating Voltage 48 V ± 4 V
Length 5.91" / 150 mm
Diameter 0.98" / 25 mm
Weight 3.88 oz / 110 g
  • 1 x MKH 50
  • 1 x MZS 40 shock mount
  • 1 x MZW 41 windshield

No posts found

Write a review
Found a lower price? Complete this simple form:



Please feel free to contact us if you have any questions or need more information about this product using the form below.


Items of interest

Customers also bought