MAGEWELL : PRO CONVERT HDMI PLUS

Price upon request
Short description:

Convert HDMI video to an NDI stream with the Pro Convert HDMI Plus video signal converter from Magewell.

02-INT-SPL-032

Convert HDMI video to an NDI stream with the Pro Convert HDMI Plus video signal converter from Magewell. Pro Convert features one HDMI input and one HDMI loop-through output with eight channels of embedded audio, and it supports HDMI input up to DCI 4K 4096 x 2160 at 60 fps. The RJ45 Gigabit Ethernet port supports encoded NDI output up to 2048 x 2160 8-bit 4:2:2 at 120 fps.

 

Key Features

  • Convert 4K HDMI Video to NDI Stream
  • 1 x HDMI Input, 1 x HDMI Loop-Through
  • 1 x RJ45 + PoE NDI Output
  • HDMI 1.4, 2.0, DVI-D 1.0 Supported

__________________________________________________

  • The HDMI loop-through allows you to view your input on a monitor while your NDI-encoded stream can be sent to a variety of NDI-compatible encoding or streaming applications such as OBS, XSplit, vMix, Wirecast, and others via Ethernet. The mini DIN-8 tally/PTZ port provides tally input to pass-through as well as for use with the unit's status LEDs. The LEDs also indicate power, output, and input signal status.

 

  • The unit is powered by a 5V power adapter connected to its USB 2.0 Type-B port or via PoE (Power over Ethernet) over its RJ45 port. The Pro Convert can be managed with a web UI to configure settings and to perform firmware updates via the USB port. A 1/4"-20 mounting thread allows you to mount the unit in a rack, bracket, or on a stand. Included with the Pro Convert are a USB cable, a 5V power adapter, a mini DIN-8 cable, and an L-bracket for mounting.

 

  • One HDMI input, one HDMI loop-through output with embedded audio
  • Convert one HDMI signal with 8 channels of embedded audio to an NDI stream
  • Supports up to 4K60 input
  • Supports up to 2048 x 2160 8-bit 4:2:2 at 120 fps NDI encoding output
  • USB 2.0 Type-B 5V power and PoE via RJ45 port
  • Mini DIN-8 PTZ/Tally port
  • Support for NDI 3.x
  • Support for 8-channel IEC60958 audio streams
  • Support for extraction of audio formation information and channel status data
  • Support for extraction of video timing information
  • Support for extraction of 3D format information
  • Support for Side-by-Side Half, Top-and-Bottom, Frame Packing 3D mode
  • 297 MHz HDMI receiver
  • Adaptive HDMI equalizer
  • Support for customized EDID
  • Support for extraction of AVI/audio InfoFrames

 

Video Processing Features

  • Video brightness, contrast, saturation, hue adjustment
  • Video deinterlacing
  • Top field only
  • Bottom field only
  • Video aspect ratio conversion
  • Auto or manual selection of output aspect ratio
  • Video color format conversion
  • Auto or manual selection of input color format and quantization range
  • Auto or manual selection of output color format, quantization range, and saturation range
  • Support for RGB, YUV BT.601, YUV BT.709, YUV BT.2020 input color formats
  • Support for YUV BT.601, YUV BT.709, YUV BT.2020 output color formats
  • Support for Limited or Full quantization range
  • Support for Limited, Full, and 'Extended gamut' saturation range
  • Video frame rate conversion
  • Video mirror flip

 

NDI Source Name

  • Support for setting the device name shown in the system using Web UI. By default, the device name is 'Pro Convert'
  • Support for setting the source name shown in the system using Web UI. By default, the source name is 'board-index + serial number'
  • Support for setting board-index, from 0 to F, through on-board rotary switch

 

Status LEDs

  • The state of power supply: on/off
  • Tally: preview/program
  • The state of input signal: locked/unlocked
  • The state of loopthrough signal: loopthrough connected and signal detected/undetected

 

Supported Software

The following software has been tested successfully with the Pro Convert HDMI:
 

  • OBS
  • XSplit
  • vMix
  • VidBlasterX
  • Wirecast
  • streamstar SW
  • mimoLive
  • NewTek NDI-enabled encoding or streaming software

 

Supported Web Browsers

The following web browsers have been tested successfully with the Pro Convert Web UI:
 

  • Microsoft Internet Explorer 11
  • Microsoft Edge
  • Mozilla Firefox version 61 and above
  • Google Chrome version 49 and above
  • Apple Safari 11.1 and above
  • Opera 55.0.2994.44 and above

 

Input

 

Video Input Connectors

1 x HDMI (HDMI 2.0) Female

Input Video Format

HDMI (8-Bit 4:2:0)

 

UHD 4K: 60/120 fps 

Embedded Audio Input

HDMI: 8-Channel

Output

 

Video Output Connectors

1 x HDMI (HDMI 2.0) Female (Loop Output)

Output Video Format

HDMI (8-Bit 4:2:2)

 

DCI 4K: 60 fps 

Embedded Audio Output

HDMI: 8-Channel

Standards

 

HDCP Support

None

EDID Support

Manual Control

Connectivity

 

Other I/O

1 x RJ45 LAN, NDI, PoE Input/Output

 

1 x 8-Pin Mini-DIN PTZ, RS-422

Hardware

 

Memory Card Slots

1 x SD (Unspecified Type)

OS Compatibility

Windows

 

macOS

Power

 

Power Consumption

Device: 5 VDC at 2 A (10 W)

Environmental

 

Operating Temperature

32 to 113°F / 0 to 45°C

Storage Temperature

-4 to 158°F / -20 to 70°C

Operating Humidity

5 to 90%

General

 

Dimensions

4.65 x 2.64 x 0.91" / 11.8 x 6.7 x 2.3 cm

 

  • Magewell Pro Convert HDMI Plus
  • USB 2.0 Type-A to Type-B Cable
  • 5 VDC Power Adapter
  • Mini DIN-8 to RS-232/DIN-8 Cable
  • L-Bracket
  • Limited 2-Year Warranty
Found a lower price? Complete this simple form:



Customer Testimonials