Audio Inputs:

A & B – 2 inputs per channel. 2601 balanced stereo line and unbalanced AUX. 2610/2612 balanced MIC

2620 Digital USB and balanced AUX.

In option USB 2602, 2 inputs and 2 outputs

Outputs:

3 bus outputs; PGM & AUD balanced + 4 dBm;

AUX Unbalanced + 4 dBm

Balanced Outs; Max Level +26dBu (10K), +20dBm (600ohms)

Unbalanced Outs; Max Level = +20dBm/600 ohms

Optional Digital AES/EBU output for PGM & AUD.

Inputs Level/Impedance:

Balanced MIC= -25 dBu/-80 dBu; 150/250 Ohms

Balanced LINE = -20 dBu/+22 dBu; 600~ 10Kohms

Unbalanced AUX = -20 dBu/+15dBu; 600~ 10Kohms

Digital Levels:

AES-3/SPDIF outputs TCP/IP & USB inputs & outputs; 0VU RMS is set at -15dB Ref Full Scale level. 0dB Peak is set to 100% Full Digital Scale

Phantom 48v:

Standard phantom 48V power supply for up to 10 microphones.

Monitor & Hybrid Outputs:

4 stereo monitor outputs for active speakers and headphones,

including internal headphones distribution Amp (up to 8 headphones) in announcer studio.

1 External Hybrid input + 4 dBu/10K

1 External Hybrid send output (MIX-Minus) +4 dBu / 10K

Each 2602 channel has one Mix-Minus out at 0 dBu output

CUE Monitor:

3W CUE monitor with internal speaker.

ON-AIR LIGHT:

ON-AIR signal output (turns on when MIC is open) 12 VDC @ 0,3 amp

Start external devices:

One Start Devices output for each input module, to start external devices when open each channel fader. Out at minijack 1/8" // Ring = A channel (left side) Tip= B channel (right side) Open collector OFF = Open. Manages 0-24 VDC @ 100 mA.

Headroom:

22 dB @ LIN a PGM Ref + 4dBu/10 k

Frequencies response:

20-20.000 Hz +/- 0.25 dB (LIN or MIC to PGM)

Noise:

MIC, EIN=-132 dBu/200 ohms LINE, S/N > 95 dBA

Dynamic range:

From LINE to PGM > 110dBA (better than "CD quality")

Crosstalk:

PGM-AUD-SEND > 90 dBA @30-10.000 Hz

L-R & R-L > 80 dBA @ 1khz

Distortion:

From LINE to PGM out < 0.01 % THD @30-15.000 Hz.

From MIC to PGM out < 0.01 % THD @30-15.000 Hz

Phase:

From Line to PGM, < 2º L&R @50-10.000 Hz

Stereo tracking:

Below 0.2 dB error L/R in fader range 0 to 40 dB

Talkback microphone:

Included Talkback MIC, with Audio Limiter. Noise Cancelled PZM type / Outputs to Phone Line Hybrid and Studio Speaker with AutoSwitch (AutoSwitch allows one-touch Studio communication)

VU-meters:

2600XL: 4 digitally controlled VU meters 24 steps of 1 dB, DUAL type (RMS & Peak) for PGM & AUD. One Timer/Clock and one Stereo Phase Vector display

Timer /Clock Option:

Timer counts minutes: seconds during on-air MIC in order to avoid excessive speaker on-air time When the Timer is off, a standard clock

is activated

Power source:

40W switch 90-240V, 50/60 Hz, CE, UL, TUV Certified

Dimensions & Weight:

XL model: 840mm (w) x 585mm (d) x 135mm (h) - Weight 15 kg

2600XD: 845mm (w), 635mm (d), 125 mm (h)- Weight 15 kg