Mod Slider

The most compact and best value 4-axes robotized Slider on the market

______________________________________________________

Freely configure the Slider’s length

With its interchangeable rails, you can have a slider between 60 and 200cm in less than 5 minutes.

Complete freedom of motorized movements

High modularity. The panning (horizontal rotation), tilting (vertical rotation), and follow focus units are all held in place by 1/4″-20 threaded screws and are easily detachable. All modules are connected with a single cable to help with ergonomics and sturdiness.

Multiple ways of fastening possible

Integrated legs, folding legs and adjustable tripod anchors along the entire rail.

Incredible shots from any position

We can position the Slider on its integrated legs, on the adjustable legs, or fasten it with its adjustable 1/4 “and 3/8” anchor plates in any position.

______________________________________________________

Noxon Control System

Intuitive and swift control system with wireless remote controller

Pocket Size

2.2″ LCD screen

Fall-proof thanks to the protective silicone cover

Swift and intuitive thanks to the single rotating button. Program a movement in just 5 clicks

Uses a standard USB 2.0 type A cable

100 m line-of-sight range in the wireless version

Performs any activity thanks to its advanced control modes

• Manual
  • Live speed and direction control of any of the slider’s travelling, panning and tilting movements.
  • 40 speeds available.
• Auto
  • Program movements with up to 3 control points, combining the axes as you want.
  • Example:
    • From point 1 to 2 (just traveling)
    • From point 2 to 3 (travelling + panning + tilting)
    • Set the start and stop accelerations to smooth the movements as much as possible.
• Timelapse
  • Shoot-move-shoot movement (the camera remains still during the photoshoot).
  • Up to 100 hours long for a timelapse project.
  • Fast parameter configuration (frames, lapse).
  • Communication with the camera when shooting (3,5mm minijack port).
  • Ramp mode control for exposure time while shooting sunrises and sunsets.
  • Possibility to perform acceleration ramps.
  • Possibility for movement preview.
  • It is possible to disconnect the remote during the execution and the slider will keep working.
• Stop motion
  • Swift configuration of the number of shots to be taken.
  • Possibility of frame by frame movement in both forward and backward directions.
  • Possibility of moving to any frame position in just one step.
• Turn table
  • Enjoy working with 360 Photography and rotating video by adding our TurnTable accessory to the slider’s panning module.
  • It controls:
  • The complete angle to be rotated.
  • The speed for the entire movement while shooting video.
  • The number of shots for photo 360 / panoramic movement.
  • The time interval from shot to shot in order to automate the movement (the slider sends trigger commands to the camera in each photo 360 position).

Create stop motion projects with Dragonframe

Create stop motion projects controlling the slider directly from the Dragronframe software thanks to the dedicated wireless bridge.

Become the best advertisement producer

Enjoy the slider’s turntable mode using our accessory.

Sync Connect

A single remote to control all of our products.

______________________________________________________

Advanced motor movement control

Smooth and noiseless

Use the camera’s built-in microphone for interviews thanks to the motorized ultra-silent system.

Ultrasmooth movements thanks to the new accelerating system.

High precision with stepper motors and electronics capable of performing movements of 0.01 mm.

Controls camera shots to achieve incredible time-lapses

2.5 mm mini-jack output connection to control the camera shutter.

Widely used DC5.5*2.1mm power input connector that accepts third party 12V batteries.

Long battery life

• The included battery is developed and built by Noxon. The battery running time depends on the system configuration:
  • Up to 5 hours of continuous movement in single motor systems without the panning or tilting module.
  • Up to 4 hours when equipped with panning or tilting motor.
  • Up to two hours when using a 3 motor system.
• Higher capacity 12V batteries from other manufacturers or multiple Noxon batteries can be used together for even longer runtimes.

Make incredible vertical movements with your camera

Great load capacity.

Compact Slider is capable of lifting up to 3 kg vertically, enough for most DSLR camera or mirrorless+lens combinations.

______________________________________________________

Mod Slider Extra rail

Changes your Mod Slider rail length in less than 5 minutes.

Panning module

Add panoramic or panning movement to your slider

Tilting module

Add tilting movement to your slider

Follow Focus Module

Adds the ability to control and program the focus of your camera.

360 Compact slider rotary table

Benefit from the TurnTable operating mode and turn your Compact Slider into a programmable rottary table. Perfect for:

• 3D scan
• 360 photography
• 3D photogrammetry
• Video footage of product in rotation

Dragonframe control Plugin addon for Wireless remote

You can use the wireless remote control connecting to a PC/mac in order to control one or more Noxon products simultaneously from the Dragonframe software.