MUXLAB 500752 : HDMI OVER IP SYSTEM

R8 422.68
(R9 686.08 incl VAT)
Short description:

HDMI Over IP Extender kit with PoE

02-INT-SIG-016

The HDMI Over IP Extender with PoE from MuxLab multicasts digital video and audio signals to one or more receivers up to 330' (100m) away using CAT5e/6 cable.

Each HDMI Over IP Extender consists of a local unit that connects to an HDMI source, and a remote unit that connects to an HDMI source. The local and remote units can be connected together for a point-to-point connection, or through VLAN isolation on a managed network switch for a multipoint-to-multipoint configuration. However, for the multipoint-to-multipoint configuration the gigabit Ethernet switch must support the IGMP communications protocol.

 

Product Highlights

  • Allows HDMI to Connect via Ethernet
  • Extends 1080p HDMI Signals 330'
  • Supports PoE
  • Supports up to 16 Transmitters
  • Supports up to 200 Receivers
  • HDCP Compliant
  • IR Control

 

___________________________________________________________

The kit includes both an encoder and decoder. The encoder converts an HDMI bit stream into IP allowing it to be transmitted over an Ethernet LAN. The HDMI decoder converts the IP packets back to the original HDMI bit stream for playback via an HDMI display.

  • Extends 1080p HDMI signals up to 330'
  • Supports up to 16 transmitters and 200 receivers
  • Supports multicasting and broadcasting
  • Supports PoE
  • IR control, HDCP compliant
  • Applications include commercial and residential AV systems, classroom projector systems, digital signage, boardroom systems, collaborative PC systems and medical information system
Environment HDMI 1.3a, Ethernet, IGMP
Devices DVD, plasma, projectors, monitors, TV, PC, laptops, servers supporting HDMI
Transmission Transparent to the user
Bandwidth 225 MHz
Compression MJPEG
Bit Rate 60 Mbps
Latency With one (1) frame at 30 fps, there is 33 msec latency
Network Requirements Point to Point: 100BaseT
Multipoint: 1000BaseT
IR Frequency 38 KHz
Configuration Point-to-Point, Point-to-Multipoint, Multipoint-to-Multipoint*
*For multipoint-to-multipoint configuration the Gigabit Ethernet switch must support the IGMP communications protocol
Connectors HDMI receptacle x 1
RJ-45S for Cat 5e/6 unshielded or shielded twisted pair via 10/100BaseT x 1
3.5mm jacks for IR emitter/sensor x 1
DIP switches for device ID addressing x 4
DIP Switch 4-position DIP to set Device ID
Maximum Distance Based on a maximum length of 6.6' (2 m) of HDMI cable per end:
Cat5e/6: 330' (100 m) up to 1080p*
*Gigabit Ethernet required for 1080p

 

Note: When installed in an electrically noisy environment, an STP cable must be used. Also, cross-connection reduces the effective distance depending on the grade of twisted cable used

RJ45 Pin Configuration RJ-45 Link:
Pin 1 (R) Pin 2 (T)
Pin 3 (R) Pin 6 (T)
Pin 4 (R) Pin 5 (T)
Pin 7 (R) Pin 8 (T)
Cable One (1) Cat 5e/6 or better twisted pair cables required
Power Supply PoE power
Optional 5 V/1.2 A universal power supply sold separately
Power Consumption Transmitter: 2.9 W
Receiver: 1.8 W
Temperature Operating: 32-104°F (0-40°C)
Storage: -4-185°F (-20-85°C)
Humidity Up to 95% non-condensing
Enclosure Metal
Compliance Regulatory: FCC, CE, RoHS Flammability: 94V0
Dimensions 3.7 x 3.68" x 0.97" (94 x 93.5 x 24.6 mm)

Manual [DOWNLOAD - click here]

Specifications [DOWNLOAD - click here]

Found a lower price? Complete this simple form:



Customer Testimonials