DEVA BROADCAST DB4005 : SDR-BASED FM RADIO MONITOR

R43 741.17
(R50 302.35 incl VAT)
Short description:

SDR-Based FM Radio Modulation Analyzer and Monitoring Receiver

01-MON-RAD-001

Advanced FM Monitoring Receiver & MPX Modulation Analyzer

  • FM Band 65 ÷ 108 MHz Basic Spectrum Analyzer
  • Dual antenna ports with built-in RF attenuator
  • Up to 100 dBµV direct RF Antenna Input
  • Selectable wide range IF filter bandwidth
  • Built-in input for external MPX analysis
  • Fully DSP-based core
  • Built-in Loudness Analyzer
  • Bright, accurate bar graph LED metering of the Modulation and Pilot Levels
  • Total and independent Positive and Negative deviation bar graph
  • Left, Right, L+R, L-R bar graph LED audio level meters
  • Wide angle, easy to read OLED display
  • Very Intuitive Navigational Menu
  • Built-in Oscilloscope for IF, MPX, Pilot, RDS, Left & Right display
  • Levels measurement with data history
  • Spectrum analyzer allowing checking of the RF Carrier and MPX
  • Selectable De-emphasis - Off, 50µs and 75µs
  • Quick Station access via 4 Presets
  • Built-in Stereo Decoder
  • Real Time Audio Program Streaming
  • Remote Listening via optional GSM modem
  • Built-in 50 channel Data logger
  • Built-in WEB and FTP server
  • Easy to use WEB interface
  • Apple and Android devices support
  • SNTP for automatic synchronization of the built-in clock
  • RDS and RBDS decoder with BER meter
  • Alarm dispatch via E-mail, SMS, SNMP and GPO
  • Complete status reporting with SMS via optional GSM modem
  • Protected access to the device settings
  • Level Adjustable, Balanced Analog Audio Outputs on XLR Connectors
  • Professional AES/EBU, SPDIF and Optical Digital audio outputs
  • LAN port for full TCP/IP remote control and monitoring
  • Adjustable MIN/MAX alarms for RF, Pilot Left & Right Audio Levels
  • Adjustable MIN/MAX alarms for MPX, MPX Power & RDS
  • USB communication interface for local connectivity
  • Headphone output with front panel level control
  • Firmware updates will ensure improved operation
  • Accurate front-panel metering for local use
  • Restore Factory Parameters option
  • Easy Installation and Setup

 

_______________________________________________

DB4005 is DEVA Broadcast's third-generation digital FM Radio modulation analyzer and receiver, the result of long years of experience and a desire to always provide intelligent near-perfect solutions, while keeping pace with the very latest technological developments and trends.

With this product, upon demodulation of the FM signal, the RF signal is digitalized by the SDR FM tuner and all signal processing is achieved through sophisticated DSP algorithms. The high precision of the powerful digital filters used in this equipment enables the FM signal to be accurately and repeatedly analyzed with each device. An important asset to the DB4005 is the MPX input, which allows you to monitor external composite signals, regardless of whether they are from a composite STL receiver/stereo FM encoder, or from an off-air source. As this is a tool of great processing power, it provides detailed readings of all the multiplex FM signal components, while all measurements are refreshed simultaneously and synchronously.

Another useful feature of the DB4005 is the Loudness Meter, which allows for measurements to be shown as defined by ITU BS.1770-4 and EBU R128 recommendations, as the product supports both standards.

The DB4005 has an easy to read, high-resolution OLED graphical display and ultra-bright bargraph LED 60 segment indicators that allow reading the main signal parameters at a glance. The built-in oscilloscope represents the observed signal change over time and helps you visualize the most important signals participating in the process of demodulating and stereo decoding. Complementing the Oscilloscope mode, the Spectrum analyzer mode allows for spectral analysis of the input signal. Spectral components of the selected signal are determined on the basis of Fast Fourier Transform. MPX Power and all other level measurements are supported by measurement history data. Additionally, RDS information contained in the processed MPX signal is easily visualized and represented as RDS/RBDS Data and detailed RDS/RBDS Statistics.

Dependable off-air monitoring enables you to keep an eye on other stations as well as measure the important parameters of your own signal. The DB4005 is designed to support USB and LAN communication interfaces, allowing flexibility of the remote connection and control of the unit. The DB4005 is the most cost-effective way for regular monitoring of the quality and continuity of your station and up to 50 other FM Radio Stations, with many features such as TCP/IP connectivity, audio streaming, and automatic alerts for operation outside of predefined ITU-R ranges. In case of transmission failure, maintenance staff will be immediately alerted via e-mail, SNMP, or SMS, which signals the technicians to restore the normal service as soon as possible. The DB4005 allows you to monitor all RDS/RBDS and other signal parameters from everywhere via its communication channels TCP/IP, and allows for GSM Connectivity via the optional external GSM Modem. Easy channel status monitoring or audio listening from everywhere could be done through your mobile phone. With the Audio Stream Server you can even listen to, skim through, and record the audio from another station.

All the channel measurements and logs are saved on the internal device memory. The built-in FTP system manages the files in accordance with an assigned schedule. All the collected information is centralized in a database and can be revised, played back, and sent automatically to the qualified, staff if need be. The Interactive Software-based Log Viewer tool allows very detailed control and analysis of any station from the list of monitored channels. The Band Analyzer function presents an overview of all FM signals available, plus the RF signal strength of these stations. Scans are possible within any section of the FM band in 3 different modes. The generated spectrum diagram shows the RF Level vs. the Frequency.

RF Input

 
Tuning Range User selectable, 87.1-108 MHz (CCIR), 65-74 MHz (OIRT), 76-95 MHz (Japan)
Tuning Step 10, 20, 50, 100 kHz
Tuner Sensitivity 30 dBµV
Antenna Ports Dual, 2 x BNC Connectors, 50Ω
Antenna Ports Isolation > 40 dB
Internal Attenuator 0, 10, 20 and 30 dB
Dynamic range 100 dB

FM Demod

 
IF Filter Bandwindth 15 Increments (27kHz - 157kHz, Auto)
Frequency Response ±0.1 dB, 10 Hz to 86 kHz
MPX Power ±12 dBr, 20 sec. integration
Dynamic range 90 dB

MPX (Composite) Input

 
Connector BNC on rear panel
Impedance 10 kΩ
Frequency Range 10 Hz to 70 kHz; ±0.01 dB, 100 Hz to 60 kHz;
Sensitivity 3.5 Vp-p @ 100%

Stereo Decoder

 
Frequency Response (L and R) ±0.1 dB, 10 Hz to 15 kHz
SNR (Stereo) 60 dB, 50 µs de-emphasis
THD 0.15% @ 1kHz, 0.4% from 10 Hz to 15 kHz, 50 µs de-emphasis
Separation 50 dB, 50 Hz to 10 kHz, 50 µs de-emphasis
Crosstalk 52 dB

RDS Decoder

 
Standards European RDS CENELEC; United States RBDS NRSC
Error Correction & Counting Yes
AF Decoding Yes
CT (Time/Date) Yes
PI, PTY, DI, MS Yes
TA/TP Yes
RT (Radio Text), RT+ Yes
PS (Program Service name) Yes
TMC, ODA Yes
Group Analyzer Yes
BER Analyzer Yes
Group Sequence Display Yes
RDS RAW Data Display Yes

FFT Spectrum Analysis (RF, Composite, Audio)

 
Signal Sources RF (IF), MPX, Left, Right
FFT length 2048 points
Dynamic range 90 dB
Scope Analysis (RF, Composite, Audio)  
Signal Sources RF (IF), MPX, Pilot, RDS, Main, Sub, Left, Right
Record length 4096 points
Dynamic range 90 dB
Metering Accuracy  
RF Level ±1 dB, 0 to 100 dBµV
MPX Power ±0.2 dBr, -12 to 12 dBr, 0.1 dBr resolution
Total, Pos, Neg ±2 kHz, 10 to 100 kHz, 1 kHz resolution
Pilot, RDS ±0.5 kHz, 1 to 12 kHz, 0.2 kHz resolution
Audio ±1 dB, +10.0 to -55.0 dB, 0.1 dB resolution

Outputs

 
Audio (L, R) +12 dBm, 600Ω, balanced XLR Connector
AES3 (L, R) 5.0 Vp-p, 110Ω, balanced XLR Connector
SPDIF (L, R) 3.0 Vp-p, 110Ω, unbalanced BNC Connector
Optical (L, R) Transmitter, TOSLINK
Alarms Programmable terminals on rear panel, optoisolated
Headphone 6,3mm (1/4") Phone Jack

Communication Interfaces

 
USB B-type Connector
Ethernet 10/100 Base-T RJ45 Connector
GSM Modem 15 pin Male D-Sub Connector

Measurement Storage

 
Storage 16GB Build-in Memory Card
Data format Text, CSV

Power

 
Voltage 100-240V / 50-60 Hz
Power Consumption 20VA
Connector IEC320, Fused and EMI-suppressed

Size and Weight

 
Dimensions (W;H;D) 485 x 44 x 180 mm
Found a lower price? Complete this simple form:



Please feel free to contact us if you have any questions or need more information about this product using the form below.


No posts found

Write a review

Items of interest

Customers also bought