WISYCOM MTP41S : POCKET MINIATURE TRANSMITTER

R21 800.62
(R25 070.71 incl VAT)
Short description:

The MTP41S series is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications.

01-WIR-TRA-004

MTP41S is an extremely small and light pocket transmitter especially designed for professional wireless microphone applications. Very easy and quick to use thanks to OLED display, dedicated buttons and a joggle selector. MTP41S benefit also of the latest Wisycom RF technology along with an enhanced robustness against noise.

 

Improved features:

  • Integrated HW limiter

 

FEATURES

  • Up to 232 MHz bandwidth in 470/798 MHz range (others on request)
  • Miniature design with flexible pcb (no connectors) for extended reliability
  • Input dynamic extension with an integrated HW limiter (30 dB above peak)
  • Ultra-light metal alloy body (60g without battery)
  • User selectable multi-companding systems:
    • ENR (noise optimized)
    • ENC (voice optimized)
  • Battery: 1 AA Alkaline or rechargeable NiMH or Lithium
  • Autonomy:
    • > 5h @ 50mW output power
    • > 7h @ 10mW output power
  • Infrared interface for management and firmware update
  • Easy and quick to setup thru an Oled display gain/freq button and a joggle selector
  • Extended regulation on Mic input gain: 80dB in 1dB step
  • Max input level 26dBu (15.5 V clipping) to connect directly to mixers and instruments
Frequency ranges B5 option: 470 ÷ 654 MHz
B3 option: 510 ÷ 698 MHz
B2 option: 566 ÷ 798 MHz 
Switchable channels 2400 managed in 40 groups ofr 60 frequencies completely user  customizable 
Switching-window  Up to 232 MHz, depending on band (see Variants below)
Frequencies   Quartz PLL  frequency synthesizer circuit (25 kHz step)
Frequency error ± 2.5 ppm, in the rated temperature range
RF Power switchable typ. 10 mW / 50 mW
note: in some countries high power can be disabled, for local norm!
Modulation  wideband FM, with pre-emphasis
Nominal deviation ±40 kHz
Peak deviation ±56 kHz
Spurious emissions < 2 nW
Telemetry feature TX transmits also a digitally modulated sub-carrier, suitable for: 
▪ tone-squelch operating    
▪ remote battery monitoring    
▪ optional PTT (push to talk) operation
Noise Reduction system ENR  (Wisycom Extended-NR), with independent Attack- and Recovery-time, noise optimized
ENC  (Wisycom Extended-NC), with independent Attack- and Recovery-time, voice optimized & with reduced pre-emphasys
AF bandwidth 45 Hz ÷ 21 KHz (3dB)
55 Hz ÷ 20 KHz (1dB)
Distortion < 0.3 %   (0.15 % typ.)
SND/D ratio (Analogue) typ. 115 dB (A)rms with 40kHz deviation
typ. 121 dB (A)rms with 56kHz deviation
Audio input connector LEMO or DPA
LEMO connector configurable on ‘mic’ display menu in 3 options:
▪ ’2 wires’: gain selectable -60 ÷ +40 (-54 dBu ÷ +26 dBu peak), no bias voltage
▪ ‘2 wires + bias’: gain selectable -60 ÷ +40 (-54 dBu ÷ + 6 dBu peak), 5.5 V on 4k7 bias supply
▪ ‘3 wires: gain selectable -60 ÷ +40 (-54 dBu ÷ +26 dBu peak)
DPA connector (2 pin microdot audio connector) configurable only
▪ '2 wires'
▪ '2 wires+bias'
Audio input level 100 dB adjustable range from -54 dBu (775 uV) to 46 dBu (15.5 V) at peak deviation (1 kHz), adjustable in 1 dB steps
Max input level  +46 dBu (15.5 V) at clipping, +20 dBu (7.75 V) at nominal level
Managing interface IrDA
LED RGB led indication with (red, green and blue) on wireless power switch:
▪ Wireless transmission status: GREEN on/RED off
▪ Battery lifetime status: GREEN steady (> 25%), slowly blinking (< 25%), quickly blinking (<12%)
▪ Modulation peek (if activated & the limiter is disabled): RED
▪ Ptt status: RED if active
▪ Limiter into action: Blue
Battery lifetime indication 8 steps : 7 bars (100%-87%-75%-63-50%-38%-25%) and “empty bar” quickly blinking (12% remaining)
PTT function Pin 3 of the AF connector can be setup to an external push button
Display High contrast OLED (Organic light-emitting diode) white display (128 x 32 pixels)
Power supply 1 AA size cell (Alkaline, rechargeable NiMH or Lithium)
Battery life ▪ approx. 11 hours @ 50mW continuous working Lithium
▪ approx. 8 hours @ 50mW continuous working with NiMH
▪ approx. 4.5 hours @ 50mW continuous working with Alkaline
Temperature range -10 ÷ +55 °C
Dimensions 58.2 x 64.5 x 21.7 mm  (HxWxD) with clip
Weight Approx. 80 g. without battery (120g with batt.)

Datasheet (MTP40S-MTP41_S_WIDEBAND_BODYPACK_TRANSMITTER.pdf, 769 Kb) [Download]

Manual (MTP41_manual.pdf, 1,706 Kb) [Download]

WISYCOM DUAL PLUG-ON | BOOM KIT 2
R63 526.19 (R73 055.12 incl VAT)
WISYCOM DUAL PLUG-ON | BOOM KIT 1
R52 189.87 (R60 018.35 incl VAT)
WISYCOM DUAL ENG : KIT 2
R57 997.88 (R66 697.56 incl VAT)
ZAXCOM ZMT3 : PHANTOM 2
R29 766.90 (R34 231.93 incl VAT)
WISYCOM MTH400 : HAND HELD TRANSMITTER
R19 102.28 (R21 967.62 incl VAT)

Factory Lead time : 3 weeks

No posts found

Write a review
Found a lower price? Complete this simple form:



Please feel free to contact us if you have any questions or need more information about this product using the form below.


Items of interest

Customers also bought